| Customization: | Available |
|---|---|
| Output Type: | AC Three Phase |
| Size: | Large |
|
Still deciding? Get samples of US$ 98900/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Electric Generator 500KW Hydro Turbine With Controller
Francis turbine is a kind of turbine suit to water head 20-300meters and with certain suitable flow.
It could be divided into vertical and horizontal arrangement. Francis turbine have the advantage of high efficiency, small size and reliable structure.
Horizontal Francis turbine unit, with horizontal shaft, could be 2 or three supports. Which is normally one stair arrangement. Simple structure, easier operation and maintainence.
Vertical Francis turbine unit, with vertical shaft, metal spiral case or concrete spiral case. With adjustable guide vane, and stay ring etc parts, are suit to runner diameter bigger than 1000mm. Our engineer will select the most suitable Francis turbine for your hydro power project.
Francis Hydrolic Turbine Product Parameter
| Hydro Francis Turbine and Generator | |||||||||
| Maximum head Hmax(m) | 90 | Design head Hr(m) | 81 | Minimum head Hmin(m) | |||||
| Installed capacity N(KW) | 1×1075 | Design discharge Q(m3/s) | 1×1.63 | Altitude▽(m) | |||||
| Technical parameter of turbine and generator (Two fulcrum) | |||||||||
| SN. | Turbine parameters | Generator parameters | |||||||
| 1 | Turbine type | HLA575C-WJ-60 | Generator type | SFW1075-6/1180 | |||||
| 2 | Layout pattern | Horizontal | Layout pattern | Horizontal |
|||||
| 3 | Runner diameter D1(cm) | 60 | Rated power P(KW) | 1075 | |||||
| 4 | Unit speed n11(r/min) | 66.7 | Rated voltage (V) | 6300 | |||||
| 5 | Unit discharge Q11(m3/s) | 0.503 | Rated current I(A) | 117.6 | |||||
| 6 | Model efficiency of design point ηm% | 93.2 | Rated power factor cosφ | 0.8(lagging) | |||||
| 7 | Prototype efficiency of design point ηt% | 93.7After correction) | Excitation voltage (V) | 46 | |||||
| 8 | Maximum model efficiency ηt% | 63.56 | Excitation current(A) | 276 | |||||
| 9 | Rated speed n(r/min) | 1000 | Generator efficiency ηg% | 95.4 | |||||
| 10 | TurbineRated output P(KW) | 1213.6 | Generator speed n(r/min) | 1000 | |||||
| 11 | Maximum axial hydraulic thrust (T) | 3.4 | Number of phase | 3 | |||||
| 12 | Cavitation coefficient | 0.06 | Frequency f(Hz) | 50 | |||||
| 13 | Runaway speed n(r/min) | 1815 | Insulation class | F/F | |||||
| 14 | Weight of runner(t) | 0.43 | Excitation mode | Brushless excitation | |||||
| 15 | Weight of turbine(t) | 5.1 | Weight of generator(t) | 11.5 | |||||
| 16 | Weight of turbine maximum hoisting piece(t) | 3.7 | Weight of generator maximum hoisting piece(t) | 5.8 | |||||
Francis Hydrolic Turbine Picture
Company Information
Our workshop
Enginnering Case
Packing and shipping
If you are interested in hydro turbine generator project please contact me directly!
1.flow rate ( lit/sec or m³/sec?)
2.Water head (m?)
3.Total power you need( kw?)
4.frequency (50hz or 60hz?)
5. voltage( v?)
6. on grid or off grid?
7. voltage of transmission line if it is on grid( v?)
8. Elevation(MSL)
9. Is it clean fresh water(with our sand, stone and silt ect,.)
By the way,could you tell me your whatsapp number(phone number) ?
Looking froward to hearing from you soon.
Best Regards
Nancy
Chengdu Forster Technology Co., Ltd.
){kind=link}