Low Head Turbine 1100KW Hydro Turbine Generator Price
tubular turbine is a new hi-tech product. It is well suitable for hydropower plants with water head ranging from 2 m to 10 m and unit capacity below 15MW. It has the following particular advantages: Its efficiency is higher than shaft-extension type tubular units and axial flow units; its cost is lower than axial flow units and bulb tubular units, and it is convenient to operate and maintain. Pit type tubular turbine is divided into fixed blade type (GD) and moveable blade type (GZ).
Product features
1.Power plant from influent to effluent direction basically is communicated in axial direction.If the buld turbine hydropower station water inlet outlet pipesare not turning,simple shape,flow channel to reduce the hydraulic loss,convenient construction.
2.Tubular turbine with high flow ability high specific speed,so in the head and power under the same conditions tubular turbine propeller diameter than about 10%,
3.Tubular turbine hydropower station has the advantages of compact structure,compared with the same specifications of Kaplan turbine to its relatively small size,can be arranged in the dam,cancel diversion system complex,reduce the workshop building area,reduce the amount of excavation and concrete plant,according to the analys is of revevant data,civil construction cost can save 20%-30%,
4. Tubular turbine for reversible pump turbine,the flow has no sharp corners,so that the pump and turbine can obtain good hydraclic properties.As for can with bidirectional power,bi-directional pumping and two-way drainage functions six tidal power sation.Therefore,it is suitable for the comprehensive development and utilization of low head water resource,
5. Turgo hydropower station in general than the vertical axial flow type hydropower station construction period is short,fast effect.
Hydro Turbine Product Parameters:
| 502-40 turbine performance data and supporting table |
| Model |
Turbine Parameters |
Generator Parameters |
Driving mode |
| Design head(m) |
Under the design head |
Design speed (r/min) |
The power of generator |
Rated speed(r/min) |
| Flow rate (m3/s) |
The output(kw) |
| 502-40 |
5.5 |
0.6 |
28 |
762 |
25 |
750 |
Direct connection |
| 6 |
0.63 |
31 |
796 |
30 |
750 |
|
| 6.5 |
0.65 |
35 |
829 |
35 |
750 |
|
| 7 |
0.68 |
40 |
860 |
40 |
750 |
|
| 7.5 |
0.7 |
44 |
890 |
45 |
750 |
|
| 8 |
0.72 |
48 |
919 |
45 |
1000 |
|
| 8.5 |
0.75 |
53 |
948 |
50 |
1000 |
|
| 9 |
0.77 |
58 |
975 |
55 |
1000 |
|
| 9.5 |
0.79 |
63 |
1002 |
60 |
1000 |
|
| 10 |
0.81 |
68 |
1028 |
65 |
1000 |
|
| 10.5 |
0.83 |
73 |
1053 |
70 |
1000 |
|
| 11 |
0.85 |
78 |
1078 |
75 |
1000 |
|
| 11.5 |
0.87 |
83 |
1102 |
80 |
1000 |
Direct connection |
| 12 |
0.89 |
89 |
1126 |
85 |
1000 |
|
| 12.5 |
0.91 |
94 |
1149 |
90 |
1000 |
|
| 13 |
0.92 |
100 |
1172 |
100 |
1000 |
|
| 13.5 |
0.94 |
106 |
1194 |
105 |
1000 |
|
| 14 |
0.96 |
112 |
1216 |
110 |
1000 |
|
| 14.5 |
0.97 |
118 |
1238 |
115 |
1000 |
|
| 15 |
0.99 |
124 |
1259 |
125 |
1000 |
Direct connection |
| 15.5 |
1.01 |
130 |
1280 |
130 |
1000 |
|
| 16 |
1.02 |
137 |
1300 |
135 |
1500 |
|
| 16.5 |
1.04 |
143 |
1320 |
140 |
1500 |
|
| 17 |
1.06 |
150 |
1340 |
150 |
1500 |
|
| 17.5 |
1.07 |
156 |
1360 |
155 |
1500 |
|
| 18 |
1.09 |
163 |
1379 |
160 |
1500 |
Direct connection |
| 18.5 |
1.1 |
170 |
1398 |
170 |
1500 |
|
| 19 |
1.12 |
177 |
1417 |
175 |
1500 |
|
| 19.5 |
1.13 |
184 |
1435 |
180 |
1500 |
|
| 20 |
1.14 |
191 |
1453 |
190 |
1500 |
|
| 20.5 |
1.16 |
198 |
1472 |
195 |
1500 |
|
| 21 |
1.17 |
205 |
1489 |
200 |
1500 |
|
Installation file
Company Information
Our workshop
FAQ
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need, voltage, on grid or off grid operation,
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment,upgrade, improvement, repair,refurbishment of turbines,generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: cdforster.en.made-in-china.com
){kind=link}