500KW To 5 MW Francis Hydro Turbine For Hydro Power Plant
1.Francis turbine has the advantages of compact structure,hight efficiency,can adapt to a wide range of water head of turbine types,is one of the widely used around the world.
2.When the water folw through the tuibine wheel,it folws into,axial to radial,so it is also called the radial axial flow turbine.
3.Francis turbine is also called the Francis turbine,the flow from the surrounding radial inflow runner,then approximate axial flow runner,runner by the crown,under the ring and the blade.
4.It is applicable to the head from a range of 20 metersos up to 700meters,has the advantages os simple structure,stable operation,and high efficiency,but it is generally used in the range(50 to 400 meters).Simple power from a few KW to several 101000 tile.At present,the turbine output has exceeded 700000 kilowaats, the maximum.A turbine is one of most widely usede.
Hydro Turbine Product Parameters
| HL-WJ-Francis tubine generator unit |
Generator |
Gevernor or Regulating work |
Valve |
| Turbine |
| Type |
Water head(m) |
Discharge (m³/s) |
Speed (r/min) |
Power(kw) |
Efficiency(%) |
| HL260 C-WJ-50 |
11 |
1.27 |
500 |
118.9 |
86 |
SFW100-12/740 |
YT-3000 |
Z941H-6 DN800 |
| 12.3 |
1.34 |
600 |
141.1 |
87 |
| 14 |
1.43 |
600 |
171 |
87 |
| 16.6 |
1.56 |
600 |
216.5 |
85.3 |
SFW200-10/850 |
| 19.5 |
1.67 |
750 |
277.5 |
87.3 |
SFW250-8/850 |
| 22.7 |
1.85 |
750 |
352 |
86.8 |
| 26.5 |
1.97 |
750 |
432.8 |
84.5 |
| HL260-C-WJ-60 |
11.4 |
1.86 |
428.6 |
180.5 |
86.8 |
SFW160-14/850 |
YT-3000 |
PDF6-WD DN900 |
| 13.36 |
2.01 |
500 |
229.01 |
87.8 |
| 15.2 |
2.15 |
500 |
276.6 |
87.3 |
| 18.2 |
2.33 |
600 |
366 |
87.9 |
| 20.8 |
2.51 |
600 |
446 |
87.3 |
SFW400-10/990 |
| 24.1 |
2.7 |
600 |
546.6 |
85.5 |
| 28.2 |
2.92 |
750 |
709.2 |
87.8 |
SFW630-8/1180 |
| HL260 C-WJ-71 |
10.4 |
2.48 |
375 |
224 |
88.3 |
SFW200-16/850 |
YT-3000 |
PDF6-WD DN1000 |
| 12 |
2.67 |
375 |
276.1 |
87.8 |
SFW250-16/990 |
| 14.2 |
2.9 |
428.6 |
358.1 |
88.6 |
YWT-6000 |
| 16.3 |
3.11 |
428.6 |
436.7 |
87.7 |
| 19.1 |
3.37 |
500 |
559.6 |
88.6 |
SFW500-12/1180 |
| 22.3 |
3.64 |
500 |
698 |
87.6 |
SFW630-12/1180 |
| 26.2 |
3.95 |
600 |
901 |
88.8 |
SFW800-10/1180 |
| 30.2 |
4.23 |
600 |
1106 |
88.1 |
SFW1000-10/1180 |
Water Turbine Picture
Company Information
Our workshop
Enginnering Case
FAQ
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need, voltage, on grid or off grid operation,
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment,upgrade, improvement, repair,refurbishment of turbines,generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: cdforster.en.made-in-china.com
){kind=link}
){kind=link}